Unused wires can make your home look messy and feel cluttered. Sometimes, you have an old HDMI cord for TV or a PC power cable you no longer use, but you don’t want to pull them out or leave them hanging. Hiding these wires inside the wall is a great way to keep your space neat and safe. Let’s find out how to do it step by step, using simple words and easy tricks.
Wires left out in the open can collect dust, get tangled, and even cause people to trip. If you have kids or pets, loose cords can be dangerous. Hiding unused wires inside the wall keeps your home clean and safe, and it also makes your room look much better.
You might have these unused wires:
HDMI cord for TV from an old setup
PC power cable from a computer you no longer use
Speaker or internet cables from past devices
Extra cords from old electronics
These wires can be hidden safely with the right steps.
To hide unused wires in a wall, you should first disconnect the wires from any power source. Coil up the wire neatly and place it inside a junction box or behind a removable wall panel. Cover the box or panel with a blank wall plate so it blends in with your wall. For safety, never just push wires into the wall cavity without a box, and always make sure the wires are not live.
1.
Before you touch any wire, turn off the power at the breaker. This keeps you safe from electric shock, especially if you’re working with a PC power cable or any other electrical wire.
2.
Look for both ends of the wire you want to hide. For example, check where your HDMI cord for TV or PC power cable comes out of the wall or device.
3.
Unplug the wire from any device or power source. If it’s hardwired, ask an adult or a professional to help disconnect it safely.
4.
Wind the wire into a small, neat coil. Use a twist tie or Velcro strap to keep it from unraveling. This makes it easier to fit inside a box or behind a panel.
5.
Place the coiled wire inside a plastic or metal junction box. If you don’t have a box, you can use a hollow wall panel made from leftover wood or a special removable panel. This keeps the wire safe and easy to reach if you ever need it again.
6.
Screw a blank wall plate over the box or panel. These plates are flat and come in colors to match your wall. They make the spot look tidy and hide the wires completely.
7.
If you think you might need the wire again, put a small label on the inside of the plate. Write what the wire is for, like “HDMI cord for TV” or “PC power cable.” This helps you remember later.
If you don’t want to open the wall, you can still hide unused wires:
Use cable raceways or cord covers that stick to the wall and can be painted to match your room.
Hide wires behind furniture like TV stands or bookshelves.
Coil extra wire inside a decorative basket or box and place it near the wall.
Use wall panels or cladding that can be removed easily if you need to reach the wires again.
Never leave live wires loose inside a wall.
Always use a junction box for electrical wires.
Don’t hide wires in places where they can get wet.
If you’re not sure, ask an adult or a professional for help.
Use colorful Velcro straps to bundle wires before hiding them.
Decorate blank wall plates with stickers or paint to match your room.
Turn wire hiding into a family project—see who can make the neatest coil!
Don’t just push wires into the wall without a box. This is unsafe and can cause problems later.
Don’t leave wires connected to power, even if you’re not using them.
Don’t use tape that leaves sticky marks on your wall or furniture.
:
Coil up any old HDMI cords you don’t use. Place them in a junction box and cover with a blank plate. If you want to reuse the cord later, label the plate.
:
Disconnect the cable from power. Coil it up and store it in a safe spot inside the wall using a box and plate. Never hide a plugged-in power cable.
:
Treat these the same way—coil, box, and cover.
Every few months, check any hidden wires if you can. Make sure they are still safe, dry, and not damaged. Replace any old or frayed wires if needed.
Turn off the power
Disconnect the wire
Coil the wire neatly
Place in a junction box or behind a panel
Cover with a blank wall plate
Label the plate if needed
Check wires regularly for safety
Hiding unused wires in a wall is a smart way to keep your home neat and safe. Always use a junction box or removable panel, and never leave live wires loose in the wall. With these easy steps, you can hide your HDMI cord for TV, PC power cable, and any other unused wires. Enjoy a clutter-free, stylish room that’s safe for everyone!
